Connecting the Video Camera
To connect the camera, Connect one end of the cable to the video out port on the video camera, and the other end of the cable to the appropriate port (SDI or HDMI) on the Solo unit.
The camera can be connected either before or after turning on the unit. If you power on the Solo before connecting the camera, then the message No Camera is displayed. You can then connect the camera, as described above. Only one camera can be connected directly to the Solo at any time (i.e. connecting a camera to the SDI interface as well as a different camera to the HDMI interface will not work)
The Solo is provided with a pouch, however, when removed from the pouch, it can be mounted on your camera using the separately available camera mount.
Which camera resolutions are supported?
The Solo supports the following camera input resolutions:
- 1080p50/60/25/30/24
- 1080i50/60
- 1080i59.94
- 720p50/60/25/30/24
- SD NTSC 720x480
- SD PAL 720x576
Comments
1 comment
Can i use the headset hole on the side as a Micro input or is it only IFB system
Article is closed for comments.